Mig welding machine in India
In India, there are many kinds of welding machines that you can easier to get one for your own demand. Mig welding machine in India with Display the digital welding current and the welding voltage and Function : CO2 air welding, using to weld iron, inox.
If you have a desire to buy a mig welding machine in India. It maybe seems confused of stuck due to a variety of names and it is tough to make decision. In order to make you easier in choice of Mig welding machine, take this list into consideration and some names below still a MIG welder:
Metal Inert Gas (MIG)Metal In Gas
Gasless Mig Welder
Wire Feed Welder
Mas Metal Arc Welding
Throughout the welding process, the weld puddle will be shielded by a gas known as the Inert Gas or Active Gas. It is possible to use a wire without a shielding gas, and this process will be consider as Gas-less wire Welding. Argon Gas is the most popular type of shielding gas used in because it does not have any reaction to the MIG welding process and is therefore safe to use.
Gas-less MIG welders are uasually only used by home users who operate outside on a regular basis. Note however that these can also be used on job sites and other outdoor locales. The benefit of using a gas-less MIG setup is that one would not need to worry about wind blowing the shielding gas aside and creating a hazard during the welding process.
Usages of mig welding machine utilization in India:
MIG Welders can be used for a variety of different applications. For instance you will find that they are used in both the professional and personal circles for virtually any project. From professional vehicle plants to the garage where you are working with wrought iron, these types of welder have a home anywhere.
Power Requirements for mig welding machine in India
Meeting power requirements for the purpose of a MIG welder is not hard so long as your working area meets the standards.
Single Phase MIG Welder: 230-250 Volts
Three-Phase MIG Welder: 400-420 Volts
The power outlet for a MIG welder will need to be considerably bigger than your standard outlet. This of course is to handle the start up current, or that initial power surge as you activate the device. Note that industrial machines will create a larger power surge, and there is a strong chance that you have seen these outlets on several other devices around the house. The majority of standard house plugs will not have the amperage to handle a MIG welder which means you will need to seek out higher amperages. If you are not an experienced electrician it would be in your best interest to call on professional help.